A brief guide of installation steps for the electric fat tire scooter when you get your package
The electric fat tire scooter, aka electric chopper scooter or Citycoco scooter, now has become a super fancy way for the electric scooter riders.
Today, we will show you the M1P electric fat tire scooter assembly processing after receiving the package. You will find it a ton of fun after you easily get all the accessories assembled and lean into the seat.
Step 1: lay out all the accessories
Here are all the accessories included.
- Caricabatterie
- Tool Kits
- Reflective Stripe x2
- Phone holder
- Manual
- Mirror x2
- Front tire
Step 2: Install the front tire
Use the wrench to loosen the screws on the front fork.
Then, you take out the stator from the front brake caliper. Note: Adjust the screw of the caliper if you find the wheel too difficult to get inserted into the disc brake.
Then, you move out the center roller of the front fork. Note: Get the longer bolt installed on the brake rotor side, and get the shorter one installed the other side.
Then, get the front tire settled into the front fork.
Make sure the brake rotor is into the front brake caliper. Fix the center roller and of course tighten the screws.
Step 3: Install the front fender
Find the corresponding hole site for the fender and then screw it in.
Step 4: Install the handlebar
Loosen the screws, place the handlebar in and tighten the screws. Note: Do not extremely tighten the screws until you finally adjust the handlebar to your favorite comfortable angle.
Step 5: Stick the stripes
Tear off the protective paper and stick to the correct position.
Step 6: Install the mirrors
Easily screw in the right position for the mirrors.
Step 7: Install the phone holder
Get the holder clipped in the handlebar and get screws tighten. Note: Do not forget connect the cable of the holder to the corresponding port for USB charger.
Step 8: Power on
Find the key to open the battery cover on the foot peg. Connect the battery port then use the key to power on.
Step 9: Functioning Check
Check all the data on the display and make sure every button or switch is functioning normally.
After all the stuff get well assembled, let’s cruise around and have fun! 🙂
Articoli correlati:
- Come scegliere uno scooter elettrico?
- A che velocità vanno gli scooter elettrici a doppio motore?
- Risoluzione dei problemi degli scooter elettrici: problemi comuni e relative soluzioni
- Riparazione scooter elettrici: Pochi minuti per riparare l'urto del monopattino elettrico dalla perdita d'olio
- I 7 principali consigli per la sicurezza degli scooter elettrici che tutti dovrebbero conoscere
- Consigli per ricaricare i veicoli elettrici nel freddo inverno
- Quale veicolo elettrico scegliere?
- Linkseride - Manutenzione del monopattino elettrico Fat Tire
- 6 consigli per la manutenzione della batteria agli ioni di litio dello scooter elettrico Citycoco
- Come aggiungere la staffa della batteria al baule laterale dello scooter elettrico
- How to Install the Side Trunk to Your M1P Citycoco Fat Tire Chopper Scooter
- Fat Scooter M8 chopper scooter Café Cruiser
- Scooter elettrico M6 Big Tire per gli spostamenti quotidiani
- Recensione del monopattino Linkseride Big Tire: Scooter ETWISTER M2
- Recensione del monopattino elettrico Fat Tire M1P Chopper 2.0
- Tutto quello che c'è da sapere sui monopattini Fat Tire
- Perché tanta richiesta di pneumatici grassi
